• English
  • Čeština
  • Nederlands
  • Français
  • Ελληνικά
  • Slovenščina
  • Español
  • Svenska

Monitoring products

HWg-STE plus

WEB-based temperature and humidity measurement with two Digital Inputs for dry contacts. Supports SNMP and the SensDesk online portal.
Sends an e-mail when a contact is closed or the temperature is high. Supplied with PDMS – Windows software for producing MS Excel reports.
Supports SNMP. Supplied with one temperature probe, power adapter and software.

Product map:

IP / WEB interfaceEmailSNMP TrapLoggerDigital Inputs1Wire Sensors (RJ11)1Wire UNI support
YesYesYesNo22No

HWg-PWR12

HWg-PWR12 is an Ethernet-enabled device for remote monitoring and metering of electricity, heat, water or gas consumption using electricity meters, water meters, gas meters, heat meters and other sensors equipped with the M-BUS interface. In addition to metering, the device also supports alarming through e-mail or sending SNMP traps whenever allowed values are exceeded.

Product map:

IP / WEB interfaceGSM (SMS)GSM (GPRS / data)EmailSNMPSNMP TrapLoggerDigital InputsDigital Outputs1Wire Sensors (RJ11)1Wire UNI supportIndustrial sensors (RS485)M-Bus sensorsOutput typeFlash bufferConfigurationVirtual Serial port
YesNoNoYesYesYesYes8NoNoNoNo12NoNoWebNo

HWg-PWR25

The HWg-PWR25 captures data from 25 external meters on the M-Bus and connects the data to IP. M-Bus data are available over Web (graphs), SNMP, Emails or Log files. With external M-Bus (EN 13757) meters it can be used for remote monitoring/metering of Electricity power, Heat, Water or Gas consumption. There are standard 3rd party M-Bus compatible meters on the market and you can connect up to 25 external M-Bus meters (electricity, heat, gas, water).

Product map:

IP / WEB interfaceGSM (SMS)GSM (GPRS / data)EmailSNMPSNMP TrapLoggerDigital InputsDigital Outputs1Wire Sensors (RJ11)1Wire UNI supportIndustrial sensors (RS485)M-Bus sensorsConfiguration
YesNoNoYesYesYesYes8NoNoNoNo25Web

HWg-Ares14

HWg-Ares14 is a remote environment monitoring solution that can be used at any place with GSM coverage. Contains a battery for several hours of backup, therefore it can notify about power failures by email or SMS (up to 5 phone numbers). Data can be read into HWg-PDMS (free software), connected to a Web portal or to a SCADA/NMS system.
HWg-Ares collects and records data from connected 1-Wire and 1-Wire UNI sensors. Stored values can be sent to any system. Values outside of a specified range trigger an e-mail (over GPRS) or a text message (SMS) to multiple recipients.

Product map:

IP / WEB interfaceGSM (SMS)GSM (GPRS / data)EmailSNMPSNMP TrapLoggerDigital InputsDigital Outputs1Wire Sensors (RJ11)1Wire UNI supportIndustrial sensors (RS485)M-Bus sensorsFlash buffer
NoYesYesYesNoNoYes2NoNoYesNoNo2 MB

HWg-Ares12

HWg-Ares 12 is a remote environment monitoring solution which only needs GSM signal coverage. The device contains an internal back-up battery and if an external power supply fails, up to 5 recipients are alerted by e-mail or text message. HWg-Ares 12 can be used also as a simple GSM thermometer.
Simply connect external sensors (temperature, 4-20mA, humidity, light and other sensors) or two dry contacts and monitor all probes remotely. Sensor data can be read into HWg-PDMS (free software), connected with a Web portal or passed to a SCADA/NMS system.

Product map:

IP / WEB interfaceGSM (SMS)GSM (GPRS / data)EmailSNMPSNMP TrapLoggerDigital InputsDigital Outputs1Wire Sensors (RJ11)1Wire UNI supportIndustrial sensors (RS485)M-Bus sensorsFlash buffer
NoYesYesYesNoNoYes2NoNoYesNoNo2 MB

HWg-WLD Relay

HWg-WLD Relay detects a water leak anywhere along the length of the connected sensing cable (2+2m – 6.5+6.5ft). Water leak or cable disconnection is indicated by activating a relay (NO/NC). The sensor can be connected to a Poseidon unit over the 1-Wire UNI bus (RJ11).

Product map:

IP / WEB interfaceGSM (SMS)GSM (GPRS / data)EmailSNMPSNMP TrapLoggerDigital InputsDigital Outputs1Wire Sensors (RJ11)1Wire UNI supportIndustrial sensors (RS485)M-Bus sensors
YesNoNoYesYesYesNoNoNoNoNoNoNo

HWg-PWR3

HWg-PWR3 is an Ethernet-enabled device for remote monitoring and metering of electricity, heat, water or gas consumption using electricity meters, water meters, gas meters, heat meters and other sensors equipped with an M-BUS interface. In addition to metering, this device also supports alarming through e-mail or SNMP traps whenever allowed values are exceeded.

Product map:

IP / WEB interfaceGSM (SMS)GSM (GPRS / data)EmailSNMPSNMP TrapLoggerDigital InputsDigital Outputs1Wire Sensors (RJ11)1Wire UNI supportIndustrial sensors (RS485)M-Bus sensorsOutput typeFlash bufferConfigurationVirtual Serial port
YesNoNoYesYesYesYes8NoNoNoNo3NoNoWebNo

HWg-WLD

HWg-WLD is 2D area water leakage detection sensor with Ethernet output. Liquid is detected along the entire length of the sensing cable, which can be extended to up to 100m. The cable has high sensitivity to detect even the smallest amount of water or condensation. Set contains one 2m detection cable.
Alerts: Email, SNMP Trap, Remote relay (Poseidon / Damocles)

Product map:

IP / WEB interfaceGSM (SMS)GSM (GPRS / data)EmailSNMPSNMP TrapLoggerDigital InputsDigital Outputs1Wire Sensors (RJ11)1Wire UNI supportIndustrial sensors (RS485)M-Bus sensors
YesNoNoYesYesYesNoNoNoNoNoNoNo

Damocles 1208

Damocles 1208 provides 12 digital inputs (DI) and 8 digital outputs (DO) that can be remotely controlled over the Web.
Inputs and outputs can also be controlled using M2M protocols over IP (SNMP, Modbus/TCP, XML over HTTP). As Damocles 1208 is an industrial model, it can be mounted to a DIN rail.
In a typical application, Damocles 1208 is used to connect I/O over the Ethernet. Digital outputs can match the digital inputs of another unit (Box-2-Box mode).

Product map:

IP / WEB interfaceGSM (SMS)GSM (GPRS / data)EmailSNMPSNMP TrapLoggerDigital InputsDigital Outputs1Wire Sensors (RJ11)1Wire UNI supportIndustrial sensors (RS485)M-Bus sensors
YesNoNoYesYesYesNo128NoNoNoNo

HWg-STE PoE

HWg-STE PoE is an IP enabled web thermometer with Email alerts and SNMP. This device measures temperature and humidity with two external probes and can be powered over Ethernet or from a wall plug adaptor.
Typical applications include remote monitoring of the temperature of equipment, computers or disk arrays, or monitoring HVAC operation.

Product map:

IP / WEB interfaceGSM (SMS)GSM (GPRS / data)EmailSNMPSNMP TrapLoggerDigital InputsDigital Outputs1Wire Sensors (RJ11)1Wire UNI supportIndustrial sensors (RS485)M-Bus sensors
YesNoNoYesYesNoNoNoNo2NoNoNo