• English
  • Čeština
  • Nederlands
  • Français
  • Ελληνικά
  • Slovenščina
  • Español
  • Svenska


AirFlow sensor 5101

SL5101 calorimetric sensor detects air flow below or above a specified threshold in 1 to 10 m/s range and its output is a normally-open relay contact. The sensor needs a 24VDC power supply.

Door contact MK4

Security Door contact MK4 with 3m cable.

Smoke Detector

FDR26 Optical Smoke Detector is designed for smoke detection and fire alarm signalisation. If the detector senses smoke, a relay is activated. As FDR26 does not react to temperature changes, it is suitable for installation in data centers and telco rooms.


PowerEgg detects failures of power supply (110/230V single phase, max. load 8A) and can be also controlled with a relay.
It is possible to connect PowerEgg to any device with digital inputs (DI) and/or digital outputs (DO). The controlling and controlled circuits are electrically isolated, low-voltage closing contacts are used for power detection and output control only.

Motion PIR Detector

PIR motion detector JS-20, designed for property protection, uses multiple signal analysing method. For better connectivity, the product is equipped with a free pair of terminals (GBS).

Gas Leak Detector

GS-133 detects all types of flammable gasses (natural gas, coal gas, propane, bottle-gas, acetylene, hydrogen, etc.) and can be set to react to any or higher concentration of gas. 12V DC power supply required.

Flood detector LD-12

LD-12 water flood detector is designated for water leak detection or for detecting excessively high water level. Water detector can be connected to a dry-contact digital input (Poseidon, Damocles, I/O Controller). The detector is equipped with transistor at the output and requires 12V DC power supply.

Door contact

Position detection.